Overview:
Tarot T-2D gimbal is specially designed for Gopro Hero3 camera.Adopting 6061T6 aluminum alloy full CNC precision machining and brushless motor direct driving,it is easy to instal.Even the aircraft is in high speed flight, it can still stabilize and control the Gopro camera precisely with the highest stability to achieve best camera performance.
Description:
Brand: Tarot
Item Name: Camera Gimbal TL68A00
Working Voltage: DC 7.4V ~ 14.8V (Recommended 12V, three lithium battery)
Working Current: 200mA-500mA (power supply voltage and the motor related)
Working Environment Temperature: minus 15 degree ~ 65 degree
Processor: Dual 32-bit high-speed ARM core processor
Sensor: Three rotor MEMS gyroscope rotor MEMS accelerometers and the three
Maximum Angular Rate: 2000 degree / sec
Maximum Acceleration: 16g
Control Frequency: 2000Hz
Motor Drive Frequency: 20KHz (no noise smoothing driven)
Control Accuracy: 0.1 degree
Control Angle Range: -45 degree ~ 45 degree (roll), -135 degree ~ 90 degree (tilt)
Pose Solver Algorithms: PTZ dedicated brushless motor decoupled EKF algorithm
Shooting Equipment: GOPRO Hero compatible
Support Remote Devices: PPM/PCM/2.4G
Support Receiver: conventional receiver, S-BUS receiver, DSM2/DSMJ/DSMX receiver
Features:
Support GOPRO Hero3 video auxiliary output
Support the supply voltage polarity protection and voltage compensation
Support the motor drive end short-circuit protection
Support for custom initial pitch angle
Support sensitivity parameter adjustment and software 3D pose show
The support rocker rate mode and position mode
Gimbal Stabilization system software,
please click here to download at Tarto website
Related Spare Part :
Head hanging hook TL68A01
GOPRO camera fasteners TL68A02
GOPRO brushless PTZ camera frame assembly TL68A03
GOPRO head roll arm TL68A04
GOPRO PTZ stand arm motor base TL68A05
GOPRO brushless motor TL68A06 PTZ
GOPRO two axes PTZ shock group TL68A07
GOPRO brushless pan rack assembly TL68A08
GOPRO head roll axis brushless motor TL8A09
GOPRO AV video output cable TL68A10
GOPRO PTZ suspension ball TL68A11
GOPRO two-axis gyroscope ZYX22 PTZ
Package Included:
1 x Camera Mount
1 x board
2 x motor
1 x gyro
1 x wire set
1 x screw set
Important information for buyers:
Shipping
Average Standard transit times are between 7-15 days, but can take up to 30 days for certain reasons (weather, airlines, custom etc.).Duties and taxes may be charged on certain items. Buyers are responsible for any duties or taxes if required in your country.
Packing
The above postage and handling fees include actual registered postage plus packaging cost. Buyers must agree with the postage and handling fees policy before placing their order.
Terms of sale
Our main goal is to provide cent % satisfaction to our customers. If you are not satisfied with your purchase you can send the items back to us 7 Days after receiving the goods. Please note that returned Items should be in its original condition without any use(UNOPEN). Return shipping will be paid by the buyer.
Tarot T-2D gimbal is specially designed for Gopro Hero3 camera.Adopting 6061T6 aluminum alloy full CNC precision machining and brushless motor direct driving,it is easy to instal.Even the aircraft is in high speed flight, it can still stabilize and control the Gopro camera precisely with the highest stability to achieve best camera performance.
Description:
Brand: Tarot
Item Name: Camera Gimbal TL68A00
Working Voltage: DC 7.4V ~ 14.8V (Recommended 12V, three lithium battery)
Working Current: 200mA-500mA (power supply voltage and the motor related)
Working Environment Temperature: minus 15 degree ~ 65 degree
Processor: Dual 32-bit high-speed ARM core processor
Sensor: Three rotor MEMS gyroscope rotor MEMS accelerometers and the three
Maximum Angular Rate: 2000 degree / sec
Maximum Acceleration: 16g
Control Frequency: 2000Hz
Motor Drive Frequency: 20KHz (no noise smoothing driven)
Control Accuracy: 0.1 degree
Control Angle Range: -45 degree ~ 45 degree (roll), -135 degree ~ 90 degree (tilt)
Pose Solver Algorithms: PTZ dedicated brushless motor decoupled EKF algorithm
Shooting Equipment: GOPRO Hero compatible
Support Remote Devices: PPM/PCM/2.4G
Support Receiver: conventional receiver, S-BUS receiver, DSM2/DSMJ/DSMX receiver
Features:
Support GOPRO Hero3 video auxiliary output
Support the supply voltage polarity protection and voltage compensation
Support the motor drive end short-circuit protection
Support for custom initial pitch angle
Support sensitivity parameter adjustment and software 3D pose show
The support rocker rate mode and position mode
Gimbal Stabilization system software,
please click here to download at Tarto website
Related Spare Part :
Head hanging hook TL68A01
GOPRO camera fasteners TL68A02
GOPRO brushless PTZ camera frame assembly TL68A03
GOPRO head roll arm TL68A04
GOPRO PTZ stand arm motor base TL68A05
GOPRO brushless motor TL68A06 PTZ
GOPRO two axes PTZ shock group TL68A07
GOPRO brushless pan rack assembly TL68A08
GOPRO head roll axis brushless motor TL8A09
GOPRO AV video output cable TL68A10
GOPRO PTZ suspension ball TL68A11
GOPRO two-axis gyroscope ZYX22 PTZ
Package Included:
1 x Camera Mount
1 x board
2 x motor
1 x gyro
1 x wire set
1 x screw set
Important information for buyers:
Shipping
Average Standard transit times are between 7-15 days, but can take up to 30 days for certain reasons (weather, airlines, custom etc.).Duties and taxes may be charged on certain items. Buyers are responsible for any duties or taxes if required in your country.
Packing
The above postage and handling fees include actual registered postage plus packaging cost. Buyers must agree with the postage and handling fees policy before placing their order.
Terms of sale
Our main goal is to provide cent % satisfaction to our customers. If you are not satisfied with your purchase you can send the items back to us 7 Days after receiving the goods. Please note that returned Items should be in its original condition without any use(UNOPEN). Return shipping will be paid by the buyer.